MMT-R01

Mortuary Table

MMT-R01

Features

• All 304 stainless steel construction.
• Table height is adjustable from 720 mm to 920  Work surfaces can rotate 40 degrees.
• The powerful crusher under the pool can crush broken objects after dissection and discharge them through the drain.
• There is a hair separator in the pool to prevent hair from entering and blocking the drainage pipe.
• Negative pressure ventilation system: the upper ventilation is drawn downward from the inclined ventilation openings on both sides of the inner table, and the lower ventilation is drawn through the openings around the base, which can extract harmful gas leaked during the dissection process in time (the external ventilation system needs to be connected).
• Equipped with hot and cold regulator, induction faucet, and manual faucet (requires connection to a water heater).
• The water pressure of the mobile spray and flushing gun can be adjusted to clean dirt from the dissection table.
• The table is equipped with a sieve isolation plate engraved with a laser scale. The tabletop can be turned over or detached. The mobile plate on the tabletop can be used for organ placement during dissection.
• There is leakage protection and a waterproof socket on the side of the table, making it easy to connect dissection tools.
• Design: Fixed-type stainless steel construction with noise-reducing underlay
• Inclined surface towards sink for efficient drainage
• Support Column: Stainless steel with water-protected plug-in socket and lever mixing battery for hot and cold water
• Water System:
• Integrated telephone shower and hose shower
• Built-in sprinklers for body washing
• Body Support: Sliding type for easy positioning
• Additional Facilities:
• Attached notes table
• Organ weighing setup included
• Dimensions:
  • Table: Approx. 240 × 80 × 85 cm (L × W × H)
  • Organ Basin: Approx. 40 × 50 × 25 cm (L × W × H) with mesh basket
• Optional: Dissection table and organ basin may be quoted separately

Technical Specifications